1, installation should pay attention to the valve body on the arrow should be consistent with the medium flow direction. Do not install in a place where there is direct dripping or splashing. Solenoid valve should be installed vertically upward;
2, the solenoid valve should ensure that the power supply voltage is 15%-10% of the rated voltage fluctuation range of normal work;
3. After installation of the solenoid valve, there shall be no reverse pressure difference in the pipeline. And need to power up several times, so that the temperature can be formally put into use;
4, the solenoid valve should be thoroughly cleaned before installation. The incoming medium shall be free of impurities. Valve before the filter;
5. When the solenoid valve fails or is cleaned, in order to ensure the continued operation of the system, the bypass device should be installed.
